MENU

Mounting of bearings

When mounting the bearings please note that loads must not be directed through the sliding contact surfaces. In order to avoid damages of the bearing and housing please ensure the use of adequate tools. By means of warming or overcooling the bearing the assembly force could be reduced. In this case please note the working temperature of the bearings.

Mounting of bearings

WSW Wälzlager  |  Wolfgang Streich GmbH & Co  |  Ravensberger Bleiche 5  |  D-33649 Bielefeld (Ummeln)  |  +49 (0) 5 21 / 9 47 03 - 0  |  wsw@wsw-waelzlager.com
Choose your language    

BACK